Race Car Transport
Sand / Vapour Blasting Cabinet Conversion Kit
Dasberg Vapour Blaster 'Piggy-Back' Conversion Kit - X250 Model (Under license - Allard Group)
Designed in conjunction with the popular Chinese sand blasting kit which has been sold worldwide.
X250 is your one stop solution, easy to fit, easy to operate.
Versatile and reliable design, a must if you wish to convert your existing sand blasting cabinet into a Vapour Blasting master piece..
The kit comes as a fully functional 'piggy back' kit, designed to fit ONLY to the well known Chinese sand blasting cabinet with the following model names and overall dimension:
Unbranded 220L - 890 x 570 x 1380 Overall Dimensions.
Sealey "SB973" 220L - 890 x 570 x 1380 Overall Dimensions.
Draper 220L - 890 x 570 x 1380 Overall Dimensions.
(There are variations in the build design of the 220L Chinese cabinets. One version is fully flat pack design (as per our photos), the other is semi welded design, both are compliant with the X250 Kit).
Please note!! We have a lead time of 18- 20 days from payment date.
What's in the Kit?
1). Mixing chamber (includes all fittings, sight gauge, flanges, gaskets).
2). 240v 20,000LPH Pump assembly (with foot switch + agitation hose/fittings)
3). Mounting frame + fittings
4). Front panel assembly + fittings
5). Air regulator unit + one way value
6). Air vent system + gaskets, flanges + fittings
7). Rubber door seal
8). Water and air hoses + fittings, clips
9). Port west rubber gloves
10). lighting system + lens x2, gaskets x2, led units x2, cables/connectors
11). Lower chamber debris filter + fittings
12). Blast gun + fittings
13). Operation Guide
14). Assembly Guide
Which air compressor is suitable?
Minimum requirement @ 15 CFM 200 Litre 3HP 240v
Ideal @ 18 CFM 200 Litre 4HP 240v
Best @ 36 CFM 270 Litre 2x4 HP 240v
(Helpful hint: it is possible to add a secondary air cylinder to a pre-existing set-up, helps with longer blast cycles)
Other options available upon request: (not included currently)
Wiper motor + arm/ blade kit (ask for availability)
Stainless steel internal shelve (ask for availability)
Internal clean water spray kit (ask for availability)
This advert is ONLY for the Dasberg X250 'Piggy-back' kit, the Chinese sand blasting cabinet is NOT included in this sale.
How long does it take to fit the Dasberg X250 kit to an already assembled sand blasting cabinet?
Approximately 4-5 hours to carryout the required modifications to the Chinese sand blasting cabinet + fit the X250 kit.
How long does it take to assemble both the X250 kit and the Chinese sand blasting cabinet from the outset?
Best to give yourself one whole day for both units, taking it easy, perhaps two days at most (a weekend is ideal).
Will this kit fit to any other Chinese or variations of Chinese sand blasting cabinets?
Currently we only specify the unit/s we recommended above. However, welcome to make contact to discuss possible fitment solutions.
What is the capability of this set up?
The list of items you can blast is vast, from mild steel to castings, iron castings, aluminium castings/casings, the list is endless. The flow of water from the blast pump is 20,000LPH and coupled with air pressure between 20psi upto 80psi this will blast all items that will physically fit inside the cabinet.
Is this combination kit reliable?
Absolutely, the pump is the heart of the machine and is fitted with a suitable impeller to deal with the blast media within the system. The remainder of the system a quite self explanatory, allowing small adjustment here and there to allow optimum performance. Consumables are available directly from us, such as gloves, gaskets, light lens, all at competitive prices.
What is the water to media ratio?
The Mixing chamber requires 18 litres of water + approximately 2-3KG of media (dependent on media type) + dash of inhibitor (for steels). There is also a sight gauge to confirm the level remains within parameters during use.
What media types can be used in this machine?
Most media types can be used in a vapour blasting machine such as this. However, there are few media types such as walnut shell and soda are NOT suitable. The three most popular to get you started are Aluminium Oxide (medium), Glass Grit (Medium) and Glass Bead (fine). This combination covers most basic applications to get you going.
Which media offers the brighter finishes, especially on aluminium casings?
Depending upon the grade of aluminium, the most common media is the Glass 'BEAD' series options, the bead media offers a peening process rather then a cutting process such as the grits. Results in a bright, almost semi polished finish on alloys. PSI setting on the air regulator is also important and optimum finish is achieved by setting a lower psi setting, such as 20-30 psi, takes longer to achieve, but the results are very much worthwhile.
Any further questions, feel free to ask...
Allard Sports Cars Ltd
Joined August 2018
Seller's other ads
01453 799 990
|Trade or Private:||Private|
Share by Email