Description:

Caterham 7 project 

- Chassis, used as is or send to Arch for a re-skin

- Options for old trunion or newer widetrack front suspension 

- Chassis de Dion but with options for live axle arrangement for a lighter package / bike engine 

- V5C documentation present 

sarrenberg@hotmail.com

Parts included in sale of C7 FAF 

Roll Hoop Used Good 

Roll CageUsed Good 

Live Axle Assembly. Alloy diff nose, AP brakes , 3.54 Used Good / Re-built 

A-Frame Used Good 

ARB Rear/ Orange Used Good 

Wheels/ KN Jupiter Polished faceUsed Good / Reconditioned 

Rear Arches Used Solid 

Rear Shocks Live Axle Bilstein New 

Tonneau both sides Used Very Good 

Leather seats Used Good 

Scuttle Used specific to previous install 

Rear Lights Used Good 

Steering Wheel Used, holes drilled for previous boss

Live Axle Bottom Wishbones Used Good 

Live Axle Top link Used Good 

Live Axle top upper half wishbone Used Good 

Uprights Trunnion Style cw Trunnion New 

Stub Axles standard New 

Stub Axles Stainless New 

Front Brakes Used Good 

Brake lines / Hell New 

Disc cw hub Used 

Tie Rod Lever for upright New 

Steering Rack with lower colum Used Good 

Wing stays New 

Exhaust Shield New 

Registration Document V5C

Chassis 

Round Tube, lowered drivers floor: Could use as is or Strip, blast and powder coat easiest option or Strip, send to Arch for blasting, checking, coating and re-skin. (£1500). Arch could also do chassis upgrade mentioned below. All GRP and new body parts would require prepped and sprayed for car colour of choice.

Extra Parts I have if updating front and rear suspension. Chassis work needed for front pick up points top wishbone and rear top mount 

Protech single adjustable Shocks front and rear Used Good , revalved 

Springs Used,  Good 

Uprights New 

Stub Axles Stainless New 

Wishbones Top Used  

Wishbones Bottom Used 

Top ball joints New 

De Dion ears / caliper pick up block New 2.0deg 

AP calipers Race only no handbrake lever Used Good 

Radius Arms New 

ARB / Red New 

Brake lines solid New 

£1200

Parts required for de dion rear end I don’t have

7" Differential, De dion tube, rear calipers with handbrake, discs, handbrake and cable 

General Parts required for completion, kept generic as plenty of options 

Engine of choice, Radiator(I have a triple pass here for free, needs a small weld), Exhaust ( I have a zetec set of primaries here), plumbing, , Gearbox, propshaft, Vehicle loom, Headlights cw brackets, Dash, Instuments, Screen. New bolt packs from Caterham for each section. Tyres, ( i have some here to get rolling) free) 185/60/13 all round for example. Bonnet and Nose cone. 

Cosworth Vega Engine available 

https://www.racecarsdirect.com/Advert/Details/119758/20-cosworth-vega-engine

Keyword Search Terms: