Description:

Pair large rubber Donut/'Guibo'/Rotaflex type driveshaft couplings. Believed to be for 4.44" pcd installations (not the smaller 3.78" type) 13mm dia bolt holes

May have been installed but certainly look as if they have never transmitted torque, as no evidence of cracking, flexing or deterioration of any kind

The original steel bands usually supplied to compress the couplings during fitment are no longer present. Instead, you will need to use either a very large robust jubilee clip - or better still a series of 3 linked jubilee clips - which will allow you to compress the couplings such that they will fit the 4.44" pcd ...as uncompressed they measure approx 4.68" pcd

YOU must determine suitability for your application

£40.00 the pair

07703 162409

dermothealy@btinternet.com