Buy & sell race cars, rally cars, transporters, trailers & parts.

£ 5,700

Mazda 13B peripheral Port engine and 55mm ITB’s

Apex

Description:

Mazda RX7 13b Balanced Peripheral Port Engine **Fresh build**.

PRICE IS FOR ENGINE ONLY WITH WHATS MENTIONED BELOW, thanks 

This is a serious spec naturally aspirated engine with no expense spared. This is advertised elsewhere so I have the rights to remove at anytime. I am testing the water with this setup as I have spent over a year gathering these parts from all over the world. I am only considering selling due to work situation. In no rush to sell so I won’t be accepting or responding to any low ball offers. I have everything available minus ecu and loom to make this setup complete if needed or you can go carb depending on your needs. 

 

Specs as follows 

 

0 mile engine 

Fresh built & balanced assembly 13B 

built by era at Oldones racing who has a well known reputation for his work

13b 6 port FC engine 

Tip clearances 

Rotary aviation super seal apex seals from USA

Rotary aviation race springs from USA 

Fully balanced assembly for 10,000+rpm

55mm Peripheral porting & sleeve inserts 

Vband connections on PP sleeves for easy fitting/removal of ITB’s

Lapping

Complete new genuine Mazda seal/rebuild kit 

Baffle sump plate 

Upgraded to RX7 FD oil gear due to high revving engine  

Billet 6061 Gilmer pulley kit from Australia 

This engine has the potential for around 300whp

 

This can be suited for carbs or I have T2 dizzy for injection as planned with the EFI kit listed below 

 

Also available at extra cost 

Franklin engineering Alternator relocation kit from NZ with FD3S 100amp alternator 

Franklin engineering water housing for electronic waterpump from NZ

Mazdatrix 5.5” race 2kg super light flywheel from USA 

Alcon Twinplate 5.5" clutch with sintered Disks 

Efi hardware billet pro spec 55mm extra flow ITB’s with 1150cc injectors & TPS sensor with new ITG filter and enclosed box filter from Australia

RX8 6 speed gearbox 

Total comes to just over £11,000 GBP RTP with engine. I am happy to sell at £9200 for everything. This includes the following extras all as new in boxes as listed below. As you can see all the best parts on the market were used and any questions please let me know. 

EFI Hardware race spec extra flow 55mm ITBs with x4 injectors and fuel rails
I also have TPS sensor, adapter flange, braided fuel kit with AN fittings 
ITG foam air filter
Enclosed airbox as seen on the moffat RX7

Pair of 90 degree 55mm tubes with vbands for itb mounting but will need welding fully when set in engine/cars location

Alcon twinplate clutch with sintered disks custom made for RX7 

Mazdatrix super light flywheel 2kg billet with all fitting hardware

Quartermaster race clutch release bearing 

Franklin performance billet parts
Water housing 
Dipstick
Alternator relocation

Rx8 6 speed gearbox complete (used but perfect working order)

All new in box 
13b manifold/headed flange
2” 304 stainless tube and bends 
2” collector
2”-3” expansion cone
3” 304 tube and bends
3” large repackable backbox (tested on a car for 1 trackday to check DB’s)

rx7 FD3S alternator

Delivery can be arranged via pallet but listed as collection only due to being preferred




Details:

Seller: Sam_wsp
  Sam Carr
Seller's other ads
Country: United Kingdom
City: Staffordshire
Phone: 07837266715
07837266715
Currency: GBP
Trade or Private: Private
Price: £5,700
Added: 02/04/2021
Views: 952
Share by Email Print page Report Sold