Buy & sell race cars, rally cars, transporters, trailers & parts.

Latest ads Place an ad
Maximum Motorsport TCR

$ 150,000

McLaren M20 replica

Wyles Hardy

Description:

McLaren M20 replica


This car has been built over 12yrs to original design and specs, Full alloy tub rivetted and bonded as per original design. side mounted radiators and fuel tanks (120litr/32US Gallons) fitted with safety foam and surrounded with foam for side impact protection. M20 McLaren steering rack, alloy uprights and double adjustable shocks. 6 piston calipers on 12.25" discs and alloy hats on all 4 corners. Floor mount pedal box with adjustable brake bias. Cable drive Tach, Mechanical gauges (as per period).

Engine Specs: 509 inch BBC 4bolt block, Full ARP Stud Kit, 4.25" Steel Crank, Crower comp Rods new ARP bolts, TRW forged pistons 12.5:1compression, Seal power rings. Period correct ZL1 alloy Heads, SS Valves, HD comp springs, Crane roller rockers with Girdles Crower push rods, Crane roller lifters, Howards Mechanical roller cam. Autoverdi 6 stage dry sump pump, McLaren Structural Sump pan, 3" Hilborn Mechanical Fuel Injection with a New Enderle Lobe pump. Mallory Magneto, modified to run with a MSD, AeroFlow race wires with Ceramic boots and heat shielding.  Running a safe tune it ran 700hp at 7000rpm on the dyno. The car weighs about 800kgs.

Trans Axle, is a custom built 4 spd running Nissan gears, R230 Nissan LSD with a 10" Winters R&P.

The Body is an exact copy of the original design, running the adjustable wing between the front fenders which was a big design change from the M8s, moving the radiator from the front to the hip side mount made this possible and improved the front grip greatly the added bonus was the hot air from the radiator no longer when straight into the cockpit. The huge rear wing is mounted in the same way as the original cars with the side fences that become the rear fins and the mounts inside the fin's that are also connected to the roll Bar. The engine is connected to the rear of the tub with a front engine plate, Tripods either side connect to the Bell Housing, The roll bar mounts to the inlet manifold and the structural sump ties the bottom of the car together and that is how the engine becomes a "Stressed Member" of the chassis, all the rear suspension is tied to the Trans and trailing arms from the tub.

The car has a Motorsport NZ Log Book and is Homologated with MSNZ for the Roll Bar.

The sale will include a second set of wheels with wet tyres, Full set of body molds, and the Patterns that all the alloy parts, ie Uprights, Bell Housing and Wheel Centre's were made from. Also another Trans option is available by negotiation


The M20 was the last Can-Am car from McLaren and as such was never offered as a "Customer" car and only 3 were ever built which makes them the rarest of the breed, The last one to change hands was sold at Auction in 2014 for US$2,000,000. This is not one of the 3 originals, but with the same specs and performance it will give the driver the same rush for a fraction of the price.


Reduced to US$150000 




Video:

Details:

Item Location: New Zealand
Seller: RaceCarsDirect
Joined January 2009
  Mike Walters
Seller's other ads
Company: RaceCarsDirect
Country: United Kingdom
City: Race Cars Direct
Phone: +44 (0) 7970 736644
+44 (0) 7970 736644
Condition Used
Trade or Private: Trade
Currency:
Price: $150,000
Make an Offer
Added: 09/06/2023
Views: 10656

Share by Email
Print page
Report Sold

Join 75,000+ buyers & sellers

Get our hugely popular newsletter and be amongst the first to hear about new listings, exclusive offers & discounts!



Trustpilot